Exothermic Welding Common Joints
Exothermic Welding Common Joints – We offer wide range of Graphite Moulds used for Exothermic Welding. The Graphite Molds comes in various sizes based on type of joints. For every different type of joint – Different Graphite Moulds are used.
Based on the joint – the Exothermic Weld powder quantity is decided and accordingly the Graphite Mold is designed for Exothermic Welding.
In Exothermic Welding, TEE /T joint or Straight joint are most common joints. Our Graphite Mold TEE / T Joint Design for Exothermic Welding is very superior and is being designed by our Professional personnel taking care minutely for all technical parameters. The Exothermic Welding Graphite Mold used is not standard graphite.
From our Graphite Mold TEE/T Joint design for Exothermic Welding – A Person can do minimum 50 Joints. However it can also go to more than 150 Joint but we recommend 50 Joint in order to get good result.
The mould is made of quality graphite body to obtain the perfect seal and lasting performance .The Graphite Mold used by our company for Exothermic Welding is made of High Quality and we check all the technical parameter before its used in Manufacturing Process.
After the Graphite Mold is designed, we practically check the Joint and after it pass all our stringent check only than the Graphite Mold is being supplied to our customers for Exothermic Welding.
Exothermic Welds Joints Are Follows –
Exothermic Weld Powder is made from Modern Technology and it not only help to Weld Copper to Copper products but it also help to Joint Copper to Steel, Copper to Brass, Gunmetal to Copper etc.
Our Exothermic Welds product can join any two metals. We provide high quality products at very reasonable rate.